Digital Stepper Motor driver has better performance than analog Driver
from customer response
Digital Stepper Motor Driver:
The stepper driver is based on a DSP with advanced control algorithm. It brings a high
level of system smoothness, providing optimum torque and nulls mid-range instability.
Motor auto-identification and parameter auto-configuration technology offers optimum
responses with different motors and easy-to-use. The driven motors can run with much
lower noise, less heating, smoother movement than most of the drivers in the
markets. Its unique features make the driver more attractive
1: Digital Stepper Driver KL-8070D, $129.95, Special sale: $119.95/pcs
Heat Sink is included.
High Performance, Based on DSP Algorithm.
Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology, offers
optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce
a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 51,200 steps/rev, Can be
set by Dip switch (2,4,8,16,32,64,128,5,10,20,25, 50,125)
• Supply voltage up to +72 VDC
• Output current programmable, from 0.5A to 7.0A(Can be set by Dip switch too)
2.6A,3.4A,4.0A,4.8A, 5.4A, 6.1A, 7.0A
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Full or Half Current , Sw4: Off= Half Current
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protection
One Year USA Warranty
2: Digital Stepper Motor Driver KL-8056D, Heat Sink is included. Specification: $119,
Special sale $109.95/pcs
Heat Sink is included.
High Performance, Based on DSP Algorithm
Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology,
offers optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce
a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 51,200 steps/rev
Can be set by Dip switch (2,4,8,16,32,64,128,256,5,10,25,50,125,250)
• Supply voltage up to +70 VDC
• Output current programmable, from 0.5A to 5.6A(Can be set by Dip switch too)
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Full or Half Current , Sw4: Off= Half Current
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protection
One Year Warranty
2: Digital Stepper Driver KL-5056D, Heat Sink is included.:Specification $99,
Promotional Sale: $89.95
Heat Sink is included
High Performance, Based on DSP Algorithm.
Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology,
offers optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce
a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 51,200 steps/rev
Can be set by Dip switch (2,4,8,16,32,64,128,256,5,10,25,50,125,250)
• Supply voltage up to +45 VDC
• Output current programmable, from 0.5A to 5.6A(Can be set by Dip switch too)
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Full or Half Current , Sw4: Off= Half Current
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protection
One Year Warranty
7: Digital Stepper Driver KL-4042D, Heat Sink is included. Specification $69.95
Promotional Sale $$59.95
High Performance, Based on DSP Algorithm.
Anti-Resonance, provides optimum torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology,
offers optimum responses with different motors
• Multi-Stepping allows a low resolution step input to produce
a higher microstep output for smooth system performance
• Microstep resolutions programmable, from full-step to 51,200 steps/rev
Can be set by Dip switch (2,4,8,16,32,64,128,256,5,10,25,50,125,250)
• Supply voltage up to +36 VDC
• Output current programmable, from 0.5A to 4.2A(Can be set by Dip switch too)
• Pulse input frequency up to 200 KHz
• TTL compatible and optically isolated input
• Full or Half Current , Sw4: Off= Half Current
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protection
One Year Warranty
Click for feedback from www.cnczone.com
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
